The market share of aluminum-clad wood doors and Windows is getting higher and higher, and more users are exposed to aluminum-clad wood doors and Windows mainly because the selection of aluminum-clad wood doors and Windows is high-grade, heat insulation, sound insulation, watertight performance, airtight performance, and windproof performance are guaranteed. If you want to choose the aluminum clad wood doors and Windows, these 5 key points should not be ignored.
1. Aluminum material quality and process
The outer aluminum of the aluminum-clad wood window adopts high-quality aluminum profiles and seamless welding process to achieve seamless welding of the aluminum joints outside the window facade. The application of this technology fundamentally improves the sealing degree and finish of the outer aluminum profiles, and fundamentally prevents the occurrence of rainwater infiltration. The outer aluminum must be aluminum with cavity, the main wall thickness shall not be less than 2.0MM, otherwise the outer aluminum strength is too low in the process of use, it is easy to deformation or fall off the outer aluminum, and directly affect the service life of the window.
2. Wood selection and process
Aluminum-clad wood window adopts a unique hidden drainage, no drainage hole cover, the overall high drop drainage design on the lower side, and the watertight performance is stronger! Wood sash and window frame smooth coordination, window frame connection using the traditional wood mortise and tenon joint process, wood frame using the woodworking is larger 90 degrees double tenon process, end contact surface is larger, more sufficient, Angle strength up to 10 000 N, extremely high strength, not only elegant appearance, but also the end of the bonding strength increases, so that the frame is solid and stable. The process joint has a strong curve aesthetic feeling and reliable strength, which is more difficult in the industry at present. Wood color can be customized according to the decoration style!
3. Paint
The selection of high-quality aluminum-clad wood doors and Windows in the paint must be special water-based paint for doors and Windows, to have good texture and airtight, but also UV resistance, yellow resistance and fading resistance, the film thickness should be between 0.15MM-0.2MM, that is, 1-2° in the normal painting term, and to spray evenly without color difference and dust-free particles. It is reasonable to control the color difference of the wood joint within 0.2°. Open environmental protection spraying technology and equipment, computer intelligent color matching, color matching, spraying surface thickness uniform. Three sprays of primer can prevent wood corrosion, mildew, termites, etc., and prepare for topcoat spraying. Three sprays of primer can prevent wood corrosion, mildew, termites, etc., and prepare for topcoat spraying. Then three times of the top paint spray treatment. During the spraying process, manual polishing is inserted to ensure that the water-based paint fully penetrates the wood surface, resists aging and mildew, and has stable performance in use.
4. Hardware and handle
Aluminum clad wood Windows in the selection of hardware and handle, are selected from well-known door and window hardware manufacturers, feel smooth, strong texture, security anti-theft performance is excellent.
5. Sealing rubber strip
High quality aluminum-clad wood doors and Windows sealing rubber strip using automotive grade polymer soft and hard co-extrusion sealing rubber strip, good sealing, resilience, no retraction. The traditional sealing strip after a few years will shrink pull and produce cracks, rain seepage, not only corroded wood and also brought trouble to the user, sealing rubber strip soft and hard co-extrusion, to solve the rubber strip shrinkage and pull caused by cracks, thereby improving the service life of doors and Windows.
