Aluminum-clad wood doors and windows are a new type of doors and windows. Good aluminum-clad wood doors and windows are models of high-end doors and windows. They are currently very popular in the market, so some manufacturers do not have the production technology and capabilities of aluminum-clad wood doors and windows. The introduction of some inferior aluminum-clad wood door and window products has led to some consumers being deceived. So how to choose aluminum-clad wood doors and windows, and what kind of aluminum-clad wood doors and windows are good?
From the direct feeling and operation of the following aspects, you can easily determine what a specific aluminum-clad wood door or window looks like.
1. First, compare the national standards and industry standards to check the specific parameter values. After all, there is no way to negotiate for products that do not meet the standards. The overall thickness of aluminum-clad wood doors and windows needs to be appropriate, and the overall thickness of the profile cannot be less than 14mm, otherwise, it is easy to have an external appearance. If the strength of aluminum is too low, the outer aluminum may easily deform or fall off during use, thus affecting the use of the window.
2. Look at the appearance
What we usually call good windows are smooth linear shapes, perfect and flat paint surfaces, and small wood color differences. Observe the paint. The choice of paint must be a special paint for doors and windows. The current market situation requires the use of water-based paint, which must have good texture and airtightness, resist UV rays yellowing, and fading, and must be sprayed evenly without color difference and dust particles. Wood It is best to control the color difference at the seams within 0.2°.
3. Look at the accessories details
Sealing strips must have good elasticity, flexibility, and anti-aging properties. A better choice is a high-quality sealing strip with a high content of EPDM. The rubber strips at the corners should be installed tightly, the lines should be smooth, and the strength and air tightness should be increased. Identify the diagonal joints of glass battens and wooden battens that need to be tightly connected. First of all, the gap must not be larger than 0.5mm, and it needs to be flat without any unevenness. Secondly, the corners of the outer aluminum 45-degree angle must be flat without any unevenness, and the relative gap must be less than 0.5mm.
4. Getting Started
In terms of operation, the hardware structure must be extremely load-bearing, must be flexible in opening and closing, and must be rigorous in overlapping, with good air-tightness and hydrophobic properties. The hardware installation must be sturdy and the handle must not shake, so that the opening and closing effects can be easily achieved.
Generally speaking, aluminum-clad wood door and window products are relatively beautiful on the whole. This is because there is a set of standardized operating procedures and technical standards from material selection to technology, so when purchasing aluminum-clad wood doors and windows, it is best to be able to Let's experience the manufacturer's door and window products.
