The height and width of aluminum clad wood doors and Windows are related to the building type, and the building follows the standards of the construction industry. The following knowledge is sorted out to introduce it to you.
1. The width of aluminum clad wood window
According to the provisions of the building standard entrance code, the width modulus of the general building entrance is 300mm, that is, the general width is 600mm, 900mm, 1200mm, 1500mm, and so on.
In actual construction, the window width of our building generally starts from 600mm. It should be noted that when the window hole is too wide, it should be added with vertical elevator or "joint window", otherwise it will easily affect the strength of the window.
Then these rules are only the standard of the hole reserved on the infrastructure, in the internal separation of doors and Windows, the size and width of the window sash is generally between 550mm-700mm, the height is better not to exceed 1500mm, the fixed part in the case of glass tempering safety, you can try to maximize, while considering whether the high-rise wind pressure has an impact.
2. The height of aluminum clad wood window
The height of the window should be determined according to the requirements of lighting, ventilation, space image, etc., but pay attention to the strength of the window is too high, and if necessary, it is necessary to add beams or "patchings".
As mentioned above, in general residential buildings, the height of the window is 1500mm, and the height of the windowsill is 900mm, then the window top is 2400mm from the floor.
3. The width of the aluminum clad wooden door
Doors are generally divided into: household door, room door, kitchen door, bathroom door.
In general residential buildings, the household door is 0.9 ~ 1m, the room door is 0.8 ~ 0.9m, the kitchen door is about 0.8m, and the bathroom door is 0.7 ~ 0.8m. Due to the consideration of modern furniture moving in, the upper limit size is now taken.
The door width of public buildings is generally a single door 1m, double doors 1.2-1.8m, and then the width of the door should be considered, and the door width of the double door or multiple doors should be 0.6-1.0m.
Hotel room door width is generally ≥0.9m, bathroom door width ≥0.75m.
4. The height of the aluminum clad wooden door
For people to pass the door, the height is generally not less than 2m, and then it should not be more than 2.4m, otherwise there is a sense of emptiness, the door production also needs to be particularly strengthened. If the modeling, ventilation, lighting needs, you can add a waist window on the door, and its height starts from 0.5m, but it should not be too high.
All the size design has its more scientific use, so in the process of door and window design, if the customer has special needs, he can communicate with the engineering staff of the aluminum clad wood door and window manufacturer to avoid problems in the actual use process in the future, resulting in the replacement of doors and Windows.
