From the purchase and production of aluminum-wood doors and windows to the installation, our owners are almost in a daze. Therefore, many owners will forget the acceptance after the installation is completed. Today, Xiaobian shares a set of acceptance methods for aluminum-wood doors and windows, which can be completed in only three steps. I hope it will be helpful to everyone!
How to accept aluminum wood doors and windows?
1. Exterior structure inspection of aluminum wood doors and windows
Surface inspection: First, check whether the hardware accessories of aluminum wood doors and windows are installed, whether the surface of the accessories is handled correctly, confirm that there is no problem, and check whether the window frame and hand have scratches or uneven deformation. If any damage is found, record it and report it to the staff in time.
2. Performance inspection of aluminum wood doors and windows
If the lock installation of aluminum-wood doors and windows is unqualified, the aluminum-wood doors and windows should be directly sealed. If the aluminum and wood door and window locks are repeatedly switched loose or dislocated, they need to be replaced immediately. At the same time, after locking the aluminum-wood doors and windows, you need to push them by hand to see if they can be opened!
3. Seal check
Insufficient sealing of doors and windows is mainly caused by imperfect hardware accessories and sealing strips. Therefore, during the inspection process, we can put the A4 paper in the opening, and then close the doors and windows. If the A4 paper is easy to take out, it proves that the sealing is not good, and if the A4 paper is difficult to take out to prove the sealing of the doors and windows.
Check the waterproof effect: Check whether there are problems such as downslope and water accumulation on the doors, windows and windowsills. If there is any problem, please contact the local construction site for maintenance in time.
