oor and window cleaning is also a very important part of family hygiene. Only when the windows are bright and quiet will you feel comfortable. Now that the doors and windows are complicated, how to better clean the doors and windows? Today, Sina Doors and Windows will explain here.
Sinai doors and windows are brand X doors and windows originated from Germany. They use heat-insulating broken bridge aluminum profiles and insulating glass, which have the functions of energy saving, sound insulation, noise prevention, dustproof and waterproof. Regarding the use and cleaning of Sinai doors and windows, if you can try your best to do the following points, then the later maintenance and maintenance of doors and windows can be regarded as high-quality maintenance in the maintenance of doors and windows.
What aspects should be paid attention to in the cleaning method of doors and windows?
1. When cleaning the aluminum doors and windows of the broken bridge, people must not step on the aluminum frame, nor pull the frame for support.
2. Sealing tops and glass glue are the key to ensure the sealing, heat preservation and waterproofing of broken bridge aluminum doors and windows. If they fall off, they should be repaired and replaced in time.
3. Doors and windows can be wiped with a soft cloth dipped in water or a neutral detergent. Do not use ordinary soap and washing powder, let alone strong acid-base cleaners such as decontamination powder and toilet detergent.
4. After the rainy day, the raindrops on the glass and door and window frames should be removed in time, and special attention should be paid to the water accumulation in the chute. The chute has been used for a long time, and the friction force will increase. You can add a little engine oil or apply a layer of wax oil.
5. Frequently check the tightening bolts, positioning shafts, wind supports, floor springs, etc., and replace damaged parts and vulnerable parts of aluminum alloy doors and windows in time. Regularly add lubricating oil to keep it clean and flexible.
6. During the use of doors and windows, lightly push and pull gently, push and pull let nature take its course; do not force it if you find any difficulties, and troubleshoot first. Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to push and pull. Keep the door frame clean, especially the cleaning groove. Vacuum cleaner can be used to suck away the dust accumulated in the groove and the top of the door seal
7. Frequently check the junction of the frame and wall of Sinai doors and windows. If it becomes loose over time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, the loose screws at the connection should be tightened immediately. If the screw footing is loose, apply a small amount of cement to seal it with epoxy super glue.
