Nowadays, aluminum-clad wooden windows have become popular doors and windows. They are not only high-end atmosphere, but also sound insulation, heat insulation and heat preservation are strengthened by aluminum alloy broken bridge windows.
Aluminum-clad wooden windows adopt the structure of outer aluminum and inner wood, and most of the glass adopts multi-layer hollow tempered glass. The metallicity of the outer aluminum is not only waterproof, moisture-proof and not easy to deform; the inner wood is mostly made of red oak grown in the United States that has been strictly screened, and the surface is sprayed with imported wood water-based special paint three times. The grade of objects reflects a good visual effect.
Aluminum-clad wooden windows are more and more popular in the market for their good wind pressure resistance, water tightness, heat preservation and other properties. So how do we usually maintain aluminum-wood doors and windows to extend their service life? The following Joydident aluminum-clad wooden window supplier will talk to you about the maintenance of aluminum-clad wooden windows
1. Maintenance of hinges, hanging wheels and casters
Hinges, casters, hanging wheels and other movable parts are in long-term operation, and their performance may be reduced due to the adhesion of dust. Joydident aluminum-clad wooden windows recommend that you drop a few drops of lubricating oil to keep them more mobile, the frequency is every six months About once. Special attention should be paid to the direction in which the handle rotates and stretches. Do not use too much force, especially to educate children, do not hang on the door handle and shake, which is dangerous and easy to cause damage to the inner door.
Second, maintain the lock cylinder
When the lock core is not flexible enough to rotate, a small amount of black powder can be scraped from the pencil core and lightly blown into the key hole. This is because the graphite component in the pencil lead is a good solid lubricant. Avoid dripping lubricating oil, because this will make it easier to adhere to dust.
Three, inner wood maintenance
The inner wood of aluminum-clad wooden windows is made of red oak imported from the United States. After special processing, it has good stability. The surface is sprayed with special water-based paint to make it waterproof and anti-corrosive. But only regular and reasonable maintenance can prolong the service life of doors and windows.
First of all, pay attention to the cleaning and maintenance of the inner wood surface. Regularly use a soft cotton cloth to gently wipe off the surface dust, and at regular intervals, use a wet cotton thread that has been wrung out to wipe out the dust at the corners of the doors and windows, and then wipe dry with a clean dry soft cotton cloth. . In case of stains, you can use a clean rag to soak it in the expired milk, and then use this rag to wipe the surface to remove the dirt. Avoid using alcohol, gasoline or other chemical solvents to remove stains.
Secondly, if the inner wood is white paint, it will turn yellow over time. This is the natural oxidation process of the paint, which is a normal natural phenomenon. You can use a cloth dipped in toothpaste or tooth powder to wipe it off, which can delay the time of natural yellowing. If there are stains on the inner wood surface, do not rub it hard. You can gently remove the stains with warm tea water. After the moisture evaporates, apply a little care agent on the original part, and then lightly rub it several times to form a protective film.
Third, avoid rain and water. There are aluminum-clad wooden windows installed in the home. Pay special attention to the infiltration of rainwater. After degreasing and drying procedures, the moisture content of the wood in the aluminum-clad wooden window is between 8%-12%. If the external environment is too hot and humid, it is easy Break the timber structure and cause the timber to crack. Therefore, aluminum-wood doors and windows should be waterproof. If it encounters water, wipe it dry with a rag immediately to avoid cracking caused by water infiltration.
Fourth, maintain the glass
The door and window glass can be wiped clean with a cloth soaked in vinegar water. If the window is stained with oil, spray the cleaner on the glass first, and then stick the plastic wrap to soften the solidified oil stains. After ten minutes, remove the plastic wrap and wipe it with a damp cloth. Do not use ordinary soap and washing powder, nor use detergents with strong acids and alkalis such as decontamination powder, toilet detergent, etc., which will corrode the glass surface.
Five, maintenance of screens
When cleaning the window screens, first remove the window screens. Rinse the removed screen window gently with a soft hose or shower to remove the cobwebs, dust and other dirt stuck on it. When cleaning doors and windows, do not step on the aluminum wooden door and window frame, and do not pull the frame for support. It is easy to wear aluminum-clad wooden doors and windows or cause accidents by yourself.
Although doors and windows are a kind of durable goods, the quality of doors and windows is very important for both the overall beauty and the safety of the home. Therefore, maintenance is required every once in a while. Just follow the above methods to maintain the aluminum-clad wooden windows, which can prolong the service life of the doors and windows, and make your doors and windows more beautiful and more durable.
