Aluminum-clad wood doors and windows are the most basic configuration in the decoration design of the entire house, and they are also the windows to the soul that affect daily life. Not only consider beauty, but also consider sealing, lighting, and visual comfort. Do you really notice that the design of aluminum-clad wood doors and windows is also the most important link?
Height standards for aluminum-clad wood doors, windows, and sills
In general villas, the height of the window sill is required to be not less than 900mm. When the height of the window sill is lower than 800mm, protective measures should be taken. In public buildings, the height of the window sill ranges from 1.0 to 1.8m. The bottom surface of the window sash opening to the public walkway is The ground height should not be less than 1.1m. This standard is just a standard and does not represent all door and window designs. Currently, aluminum-clad wood door and window systems are replaced with three-layer laminated glass. Protection measures are completely unnecessary. When decorating, owners basically take The guardrail was removed.
Design width of doors and windows
The window width generally starts from 600mm. According to the provisions of the building standard opening specifications, the width module of the general building opening is 300mm, that is, the general width is 600mm, 900mm, 1200mm, 1500mm, etc. It should be noted that when the window opening is too wide, a vertical center mullion or "joint mullion" should be added, otherwise, the strength of the window will be easily affected. So these rules are just standards for reserving openings in infrastructure. For internal separation of doors and windows, the size and width of the window sash is generally between 550mm and 700mm. The height should not exceed 1500mm. The fixed part must be tempered and safe. It can be maximized as much as possible, and at the same time, the impact of high-rise wind pressure must be considered.
What is the general height of doors and windows?
In a normal house, the height of the window is 1500mm, plus the height of the window sill is 900mm, then the top of the window is 2400mm from the floor. The height of the window should be determined according to requirements such as lighting, ventilation, and spatial image. However, attention should be paid to the strength of the window that is too high. If necessary, beams or "split beams" should be added.
Design width of aluminum-clad wooden door
Generally, the door size of a house is 0.9-1m, the door size is 0.8-0.9m, the kitchen door is about 0.8m, and the bathroom door is 0.7-0.8m. Due to the consideration of moving in modern furniture, the upper limit size is often used nowadays. The door width of a public building is generally 1m for a single door and 1.2 to 1.8m for a double door. If it is wider, the production of the door leaf must be considered. The width of the door leaf of a double door or multiple doors is preferably 0.6 to 1.0m. The width of hotel guest room door openings is generally ≥0.9m, and the width of bathroom door openings is ≥0.75m.
Design height of aluminum-clad wood doors and windows
The height of doors for people to pass through is generally not less than 2m, and no matter how high it is, it should not exceed 2.4m. Otherwise, it will feel hollow, and the door leaf production needs to be specially strengthened. If needed for styling, ventilation, and lighting, a waist window can be added to the door. Its height starts from 0.5m, but it should not be too high.
