One, Structure
When building a sun room, the first consideration is the structure of the house. The structure of the sun room needs to be built according to the area of the top floor. Do not build a sun room on the top of the building without authorization, otherwise it will be an illegal construction. The urban management department came to investigate, tens of thousands or even hundreds of thousands. To be ridden.
The main structure of the sun room is its vitality, bearing the entire strength support. At present, the common sun room profiles on the market include steel structure, aluminum structure, wood structure and composite structure. If the economy permits, it is better to choose Broken Bridge Aluminum. Not only has a very strong stability, its thermal insulation is also very good.
Two, Roof glass
The roof materials are also very particular. If you want to make a glass roof, there are generally four types of glass to choose from: tempered glass, laminated glass, hollow glass, and Low-E glass.
Tempered glass is cheap, but the heat insulation and heat preservation will be very poor. What is more worrying is that once it is damaged, the glass slag will fall down, and the reliability factor is too low. Laminated glass will be better, even if the glass is damaged, the glass will not fall. Insulating glass has better thermal insulation properties. Of course, there is Low-E glass, also called low-emissivity coated glass, which not only has excellent thermal properties, but also good optical properties.
Third, The room
The surface of the sun room is also an item that cannot be ignored. Sunshine room surface materials mainly include broken bridge aluminum doors and windows, aluminum-clad wood doors and windows, color steel plates or plastic steel doors and windows. Personally, I suggest using hollow glass on the house surface and combined with broken aluminum doors and windows as the framework.
Fourth, Waterproof
There are mainly two ways of waterproofing of the sun room: material waterproofing and structural waterproofing. The material cannot be the second choice. A good sealant should be used between the glass and the glass. Where the glass contacts the wall, if the wall has an insulation layer, the insulation layer needs to be removed and then treated with a sealant. Secondly, in terms of structure, some irregular sunroom manufacturing companies often cut corners and use non-national standard steel pipes or aluminum pipes. The strength is not enough. Over time, the overall frame of the sunroom is deformed, causing the glue to crack and leak. Therefore, it is emphasized again and again that you must not be greedy for cheap, and the materials must be selected. It is not enough to do this well. Regular observation and maintenance are also required to avoid hidden dangers in the future.
Five, Shading
What should I do if the sun room is too dry? Use the sunshade! It is an indispensable equipment for the sun room. Regardless of whether it is electric or manual, it can block radiation and ultraviolet rays, reduce ultraviolet rays by about 80%, and can adjust indoor light transmittance to prevent solar refraction while effectively reducing indoor temperature.
Some friends like to use venetian blinds for sunshade. Although beautiful, venetian blinds are prone to dust, deformation, and damage, and it is difficult to clean and maintain. It is recommended to use honeycomb curtains to block the sun, which can bring you a more comfortable sun room experience no matter in winter or summer.
Sixth, Cooling down
It’s really important to cool down the sun room, especially now it’s the dog days. You can consider installing an electric sunroof, which can quickly exhaust hot air in summer, introduce fresh air, or install a spray circulating water system, which cools and dissipates quickly.
